ECO-BOND PRODUCTS

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

Helps Reduce Heating and Air Conditioning Bills

Rain and weather ready in 30 minutes. APPLICATIONS: sealing, waterproofing, installation of trim, windows, and doors, weatherproofing.  BONDS AND SEALS TO: glass, metal, aluminum, wood, copper, drywall, and most other building surfaces. SPECIFICATIONS: no toxic odor, paintable, waterproof, mold and mildew resistant, approved for indoor and outdoor use, bonds underwater, tack free in 45 minutes, children and pet safe, application temps of -35° to +140°, UV resistant.

Green Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No additional ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications
  • Glass
  • Metal
  • Aluminum
  • Wood, Copper
  • Drywall
  • Cement
  • Laminate
  • Brick
  • Marble
  • Slate
  • Steel
  • Treated Wood
  • Painted Surfaces
  • Fiberglass
  • Complete List of Materials
Product Specifications
  • Rain and weather ready in 30 minutes
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Paintable after 2 hours
  • Elongation: 300% – 400%
  • Shear strength: 190 psi
  • Tensile strength: 200 psi
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is -35° to +140°
  • Tack Free: 45 minutes
  • Sag: None
  • Staining: None
 
CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet  –  Sales Sheet –  Bonds and Seals to Chart

best all purpose

Your Jack of all Trades

For use indoors or out. APPLICATIONS: weather sealing, waterproofing, household maintenance and improvement projects. BONDS AND SEALS TO: Glass, aluminum, painted surfaces, wood, metal, cement board, siding, tile,  brick, porcelain, plywood, concrete, drywall and most other building surfaces. SPECIFICATIONS: 100% non-toxic, no toxic odor, paintable, waterproof, mold and mildew resistant, tack free in 65 minutes, UV resistant.

Green Specifications Application Specifications Product Specifications
  • Zero VOC
  • Non-petroleum based
  • Exceeds all CA Standards
  • No Toxic Odor
  • 100% Non-Toxic
  • Solvent free
  • Low odor
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED & NAHB Green Building Points
  • Wood
  • Metal
  • Drywall and Paneling
  • Plaster
  • Windows
  • Foam
  • Brick
  • Glass
  • Concrete
  • Cement board, Siding
  • Tile, Laminate
  • 2 Non porous surfaces
  • Complete List of Materials
  • Shear strength: 170 psi
  • Tensile strength: 166 psi
  • Elongation: 250%
  • Skin Time: Less than 30 minutes @ 77 degF/ 50% RH
  • Tack Free Time: 65 minutes
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: Excellent
  • Sag: None
  • Staining: None
 
     

CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet  –  Sales Sheet –  Bonds and Seals to Chart 
FLASHING-ROOF-GUTTER – Helps put a roof over your head

Designed for installation, maintenance of flashing, roofs, and gutters. APPLICATIONS: sealing, waterproofing, weatherproofing, adhesion, caulking .  BONDS AND SEALS TO: metal, plywood, fiber cement board, copper, fiberglass, asphalt, wood, slate, brick, cast iron, galvanized and painted steel, PVC and most other building surfaces. SPECIFICATIONS: sun, freeze, and frost proof, application temps of -35° to +140°, UV resistant,  no toxic odor, paintable, waterproof, mold and mildew resistant, approved for indoor and outdoor use, bonds underwater, children and pet safe, tensile strength 200 psi

   
Green Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications
  • Metal
  • Plywood
  • Fiber Cement Board
  • Copper
  • Fiberglass
  • Asphalt
  • Wood, Slate
  • Brick
  • Cast Iron
  • Galvanized Steel
  • Painted Steel
  • PVC
  • Complete List of Materials 
Product Specifications
  • Rain and weather ready in 30 minutes
  • Sun, Freeze, and Frost proof
  • Mold and Mildew Resistant
  • Bonds underwater
  • Elongation: 300% – 400%
  • Shear strength: 190 psi
  • Tensile strength: 200 psi
  • Tack Free: 45 minutes
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Service Temperature -90° to +425° F
  • Sag: None
  • Staining: None
Caulkulator Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′
Safety Data Sheet  –  Technical Data Sheet    Sales Sheet –  Bonds and Seals to Chart

best tub tile
For All Your Household Projects – Including the Kitchen Sink

More flexible than silicone. APPLICATIONS: tub sealing, countertops, sinks, shower stalls, and plumbing. BONDS AND SEALS TO: tile, porcelain, marble, granite, glass, metal, aluminum, copper, drywall, and most other building surfaces. SPECIFICATIONS: bonds underwater, low/no odor, paintable, waterproof, mold and mildew resistant, tack free in under an hour, bonding strength 200 psi, application temps of -35° to +140°, UV resistant.

 

Green Specifications Application Specifications Product Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No additional ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Shower ready in under 30 minutes
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Paintable after 2 hours
  • Elongation: 300% – 400%
  • Tensile strength: 200 psi
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is -35° to +140°
  • Sag: None
  • Staining: None
CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet  –  Sales Sheet –  Bonds and Seals to Chart 
PET SAFE – Safe for furry, feathered, or finned members of the family

Rain and weather ready in 30 minutes. APPLICATIONS: Dog and bird house construction and maintenance, sealing, repair, and maintenance in and round pet areas, aquarium sealing. Ponds, pet gates and kennels, bird baths.  BONDS AND SEALS TO: glass, metal, aluminum, wood, copper, drywall, and most other building surfaces. SPECIFICATIONS: 100% non-toxic, no toxic odor, paintable, waterproof, mold and mildew resistant, approved for indoor and outdoor use, bonds underwater, children and pet safe, tensile strength 200 psi, application temps of -35° to +140°, UV resistant.

Green Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications Product Specifications
  • Rain and weather ready in 30 minutes
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Paintable after 2 hours
  • Elongation: 300% – 400%
  • Shear strength: 190 psi
  • Tensile strength: 200 psi
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is -35° to +140°
  • Tack Free: 45 minutes
  • Sag: None
  • Staining: None
CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet – Sales Sheet –  Bonds and Seals to Chart
The Strongest Tool in Your Tool Kit

450 PSI Bonding Strength.  APPLICATIONS: metal roofing, metal buildings, industrial applications, commercial and residential construction, tractor trailers, recreational vehicles, and buses, any job requiring elasticity, strength, and a quick bond. ADHERES TO: wood, steel, concrete, stone, masonry, metal, glass, laminate, plywood, drywall as well as most building materials. SPECIFICATIONS: 100% non-toxic, no toxic odor, bonds underwater, low/no odor, paintable, waterproof, mold and mildew resistant, skin time 15 minutes, application temps -35° to +140, UV resistant.

Green Specifications Application Specifications Product Specifications
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor and outdoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Concrete
  • Block and Brick
  • Wood
  • Galvanized Metal
  • Glass
  • PVC
  • Stone
  • Foam
  • Siding, Vinyl, Aluminum
  • Drywall
  • Laminate
  • Complete List of Materials
  • Shear strength: 400 psi
  • Tensile strength: 450 psi
  • Peel strength: 27 pli
  • Shore A Hardness: 45
  • Low Temp. Flexibility:  Retained to -90° F
  • High Temp. Flexibility: Up to 425° F for short periods
  • Skin Time: 15 minutes @ 77 degF/ 50% RH
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Sag: None
CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet  –  Sales Sheet –  Bonds and Seals to Chart

Greener than your tractor – but just as strong.

Bonds Underwater.  APPLICATIONS: livestock pens, planting and harvesting equipment, watering troughs, and weather sealing. ADHERES TO: wood, steel, aluminum, coated metal, glass, fiberglass, and many plastics (Acrylic, polycarbonate, ABS, and PVC). SPECIFICATIONS: bonds underwater, no toxic odor, paintable, waterproof, mold and mildew resistant, tack free in 45 minutes, tensile strength of 200 psi, application temps of -35° to +140°, UV resistant.

Green Specifications Application Specifications Product Specifications
  • Livestock safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No additional ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Wood
  • Flashing
  • Metal
  • PVC
  • Plaster
  • Windows
  • Foam
  • Brick
  • Glass
  • Concrete
  • Cement board, Siding
  • Tile, Laminate
  • Pressure Treated Lumber
  • Painted Surfaces
  • Complete List of Materials 
  • Water and Moisture Ready in under 30 minutes
  • Bonds underwater
  • Application Temperature is  -35° to +140°
  • Paintable in 2 hours
  • Shear strength: 190 psi
  • Tensile strength: 200 psi
  • Elongation: 300% – 400%
  • Shore A Hardness: 35 +/- 5
  • Low Temp. Flexibility:  Retained to -90° F
  • High Temp. Flexibility: Up to 425° F for short periods
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Sag: None
  • Staining: None
CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet –  Sales Sheet –  Bonds and Seals to Chart
tile and floor gallow header
Now your can use the best floor and tile adhesive on larger projects!

Heavy Duty environmentally friendly adhesive/sealant for floor and tile installation. Quick grabbing with a tack free time of 20 minutes. Strong (400 psi shear strength, 450 psi tensile strength) and flexible (550% elongation). Low VOC, no/low odor and 100% waterproof. Follow flooring manufacturer’s directions for installation.

Green Specifications Application Specifications Product Specifications
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor and outdoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Shear strength: 400 psi
  • Tensile strength: 450 psi
  • Peel strength: 27 pli
  • Shore A Hardness: 45
  • Low Temp. Flexibility:  Retained to -90° F
  • High Temp. Flexibility: Up to 425° F for short periods
  • Skin Time: 15 minutes @ 77 degF/ 50% RH
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Sag: None

Download Material

Safety Data Sheet   Technical Data Sheet    Sales Sheet –  Bonds and Seals to Chart
NON-TOXIC SILICONE – Keeping your joints flexible and  your cracks sealed

AAMA Window and Door Approved  APPLICATIONS: Sealing, showers and baths, waterproofing, kitchens, windows, weatherproofing, glass replacement. PRIMER-LESS ADHESION TO: steel, aluminum, ceramics, coated metal, glass, wood, fiberglass, and many specialty materials (Kynar 500/Hylar 5000, Mica Fluropon, Metallic Fluropon, Weather X Siliconized Modified Polyester (SMP). SPECIFICATIONS: low odor, waterproof, mold and mildew resistant, tack free in 20 minutes, 255 psi bonding strength,  non-yellowing, excellent UV resistance, 19 psi peel strength, 550% elongation. 

Green Specifications
  • Children and pet safe
  • Low odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications
  • Steel, Aluminum
  • Ceramics
  • Coated Metal
  • Glass
  • Wood
  • Fiberglass
  • Kynar 500/Hylar 5000
  • Mica Fluropon
  • Metallic Fluropon
  • Weather X Siliconized Modified Polyester (SMP)
  • Complete List of Materials
Product Specifications
  • AAMA Window and Door approved
  • Excellent adhesion to glass
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Bonds and seals fully submerged
  • Tensile strength: 255 psi
  • Peel strength: 19 pli
  • Elongation: 550%
  • Shore A Hardness: 20 +/- 5
  • Skin Time: 10 minutes
  • Tack Free Time: 20 minutes
  • Cure: 24 hours
  • Movement Capability: 25%
  • UV Resistance: Excellent
  • Bond Durability on Glass/Vinyl/Aluminum: 25%
  • Service Temperature -90° to +425° F
 
CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet  –  Sales Sheet –  Bonds and Seals to Chart

Ultra-Clear Sealant

Provides nearly invisible adhesion.  APPLICATIONS: window and door sealing with stained or colored woodwork, counter tops, tiling, anywhere a silicone would be used. PRIMER-LESS ADHESION TO: steel, aluminum, ceramics, Styrofoam, coated metal, glass, wood, fiberglass, and many plastics (Acrylic, polycarbonate, ABS, and PVC). SPECIFICATIONS: low/no odor, paintable, waterproof, mold and mildew resistant, water and moisture ready in 20 minutes, 200 psi.  

Green Specifications Application Specifications Product Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Water and moisture ready in under 30 minutes
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Ultra Clear formulation
  • Extrudes at zero degrees
  • Bonds and seals fully submerged 
  • Shear strength: 200 psi
  • Tensile strength: 250 psi
  • Peel strength: 22 pli
  • Elongation: 450% – 500%
  • Shore A Hardness: 30
  • Low Temp. Flexibility:  Retained to -90° F
  • High Temp. Flexibility: Up to 425° F for short periods
  • Skin Time: 20 minutes @77 degF/50% RH
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°F
  • Sag: None
  • Staining: None
CAULKULATOR Joint Widths
Joint Depth 1/8″ 1/4″ 3/8″ 1/2″
1/8″ 96′ 48′ 36′ 24′
1/4″ 48′ 24′ 18′ 12′
3/8″ 32′ 16′ 12′ 8′
1/2″ 24′ 12′ 9′ 6′

Download Material

Safety Data Sheet  –  Technical Data Sheet  –  Sales Sheet –  Bonds and Seals to Chart