ECO-BOND PRODUCTS

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

 

Helps Reduce Heating and Air Conditioning Bills

Rain and weather ready in 30 minutes. APPLICATIONS: sealing, waterproofing, installation of trim, windows, and doors, weatherproofing. BONDS AND SEALS TO: glass, metal, aluminum, wood, copper, drywall, and most other building surfaces. SPECIFICATIONS: no toxic odor, paintable, waterproof, mold and mildew resistant, approved for indoor and outdoor use, bonds underwater, children and pet safe, tensile strength 205 psi, application temps of -35° to +140°, service temp of -90° to +425°, UV resistant.

Green Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No additional ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications
  • Same
Product Specifications
  • Rain and weather ready in  30 minutes
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Paintable after 2 hours
  • Elongation: 300% - 400%
  • Shear strength: 190 psi
  • Tensile strength: 205 psi
  • Shore A Hardness: 35 +/- 5
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Service Temperature -90° to +425° F
  • Sag: None
  • Staining: None
   

Download Material

Technical Data Sheet - Sales Sheet

Green doesn’t mean more money anymore. This green, safe adhesive will handle everything from concrete to sealing a tub or window. Built on ECO-BOND’s innovative Modified Polymer base this adhesive will provide the quick grab, moisture curing, paintable, zero VOC attributes that the more dynamic ECO-BOND products provide while being a cost effective alternative similar to our competitors non-green friendly products.

Green Specifications Application Specifications Product Specifications
  • Zero VOC
  • Non-petroleum based
  • Exceeds all CA Standards
  • No Toxic Odor
  • 100% Non-Toxic
  • Solvent free
  • Low odor
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED & NAHB Green Building Points
  • Wood
  • Metal
  • Drywall and Paneling
  • Plaster
  • Windows
  • Foam
  • Brick
  • Glass
  • Concrete
  • Cement board, Siding
  • Tile, Laminate
  • 2 Non porous surfaces
  • 190 psi shear strength
  • 190 psi tensile strength
  • Elongation 200%
  • Permanently elastic
  • Tack free 25 minutes
  • Safe to use indoors
  • Fast drying
  • Paintable
  • Applied to 30 degrees
  • Service temp -40 to 200
  • No shrinkage
       

 

Download Material

Material Data Safety Sheet  -   Technical Data Sheet - Sales Sheet
FLASHING-ROOF-GUTTER - Helps put a roof over your head

Designed for installation, maintenance of flashing, roofs, and gutters. APPLICATIONS: sealing, waterproofing, weatherproofing, adhesion, caulking .  BONDS AND SEALS TO: metal, plywood, fiber cement board, copper, fiberglass, asphalt, wood, slate, brick, cast iron, galvanized and painted steel, PVC and most other building surfaces. SPECIFICATIONS: sun, freeze, and frost proof, application temps of -35° to +140°, service temp of -90° to +425°, UV resistant no toxic odor, paintable, waterproof, mold and mildew resistant, approved for indoor and outdoor use, bonds underwater, children and pet safe, tensile strength 205 psi    
Green Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications
  • Same
Product Specifications
  • Rain and weather ready in 30 minutes
  • Sun, Freeze, and Frost proof
  • Mold and Mildew Resistant
  • Bonds underwater
  • Elongation: 300% - 400%
  • Shear strength: 190 psi
  • Tensile strength: 205 psi
  • Shore A Hardness: 35 +/- 5
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Service Temperature -90° to +425° F
  • Sag: None
  • Staining: None
Material Data Safety Sheet  -    Technical Data Sheet - Sales Sheet

For All Your Household Projects – Including the Kitchen Sink

ECO-BOND’s Kitchen, Bath & Plumbing adhesive is a premium waterproof adhesive and sealant that provides a dynamic green friendly replacement to silicons and caulk. Our Kitchen, Bath, & Plumbing adhesive will provide a lasting seal that remains flexible and sticks to the most challenging surfaces to permanently seal out water. It also offers mold and mildew protection to keep mold and mildew from growing on its seal.

 

Green Specifications Application Specifications Product Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No additional ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Fiberglass
  • Laminate
  • Wood
  • Galvanized Metal
  • Glass
  • Drywall, Paneling
  • Foam
  • Tile
  • Concrete
Shower ready in under 30 minutesApproved for indoor use
Mold and Mildew Resistant
Paintable after 2 hours
Elongation: 300% - 400%
Shear strength: 190 psi
Tensile strength: 205 psi
Shore A Hardness: 35 +/- 5
Cure Rate: 1/4” Bead per 24 Hrs
Movement Capability: 25%
UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
Application Temperature is  -35° to +140°
Service Temperature -90° to +425° F
Sag: None
Staining: None
 

Download Material

Material Data Safety Sheet  -   Technical Data Sheet - Sales Sheet
PET SAFE - Safe for furry, feathered, or finned members of the family

AAMA Window and Door Approved.  APPLICATIONS: sealing, showers and baths, waterproofing, kitchens, windows, weatherproofing, glass replacement, anywhere a silicone would be used. PRIMER-LESS ADHESION TO: steel, aluminum, ceramics, coated metal, glass, wood, fiberglass, and many specialty materials (Kynar 500/Hylar 5000, Mica Fluropon, Metallic Fluropon, Weather X Siliconized Modified Polyester (SMP). SPECIFICATIONS: no toxic odor, mold and mildew resistant, tack free in 20 minutes, 24 hour cure, 200 psi, service temps of -40° to +350°, UV resistant.

Green Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications
  • Same
Product Specifications
  • Rain and weather ready in 30 minutes
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Paintable after 2 hours
  • Elongation: 300% - 400%
  • Shear strength: 190 psi
  • Tensile strength: 205 psi
  • Shore A Hardness: 35 +/- 5
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Service Temperature -90° to +425° F
  • Sag: None
  • Staining: None

Download Material

Technical Data Sheet - Sales Sheet
The Strongest Tool in Your Tool Kit

ECO-BOND (Heavy Duty- Extra Grab) provides the same basic attributes as HD100 with a dynamic increase in instant grip and sheer strength. Boasting with over 400 psi in strength, this adhesive will grip and cure quickly on almost any surface. ECO-BOND is an excellent choice for the demands of heavy projects with quick and extra grip needs.

Green Specifications Application Specifications Product Specifications
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor and outdoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Concrete
  • Block and Brick
  • Wood
  • Galvanized Metal
  • Glass
  • PVC
  • Stone
  • Foam
  • Siding, Vinyl, Aluminum
  • Drywall
  • Laminate
  • Bonds fully submerged
  • Paintable
  • Compatible with Kynar 500/Hylar 500, Mica Fluropon, Metallic Fluropon, and Weather X Siliconized Modified Polyester (SMP)
  • Exceeds AAMA 808.3-92 requirements for Exterior Perimeter Sealing
  • Shear strength: 405 psi
  • Tensile strength: 450 psi
  • Peel strength: 34 pli
  • Elongation: 300%
  • Shore A Hardness: 45
  • Low Temp. Flexibility:  Retained to -90° F
  • High Temp. Flexibility: Up to 425° F for short periods
  • Skin Time: 15 minutes @ 77 degF/ 50% RH
  • Tack Free Time: 40 minutes @77 degF/50% RH
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Service Temperature -90° to +425° F
  • Sag: None
  • Staining: None
 

Download Material

Material Data Safety Sheet  -   Technical Data Sheet - Sales Sheet

Greener than your tractor – but just as strong.

ECO-BOND’s Farm Safe Adhesive/Sealant low VOC and non-toxic formulation make is the safest adhesives and sealant for use with livestock and planting and harvesting equipment. Farm Safe’s bonding strength of over 200 PSI and underwater bonding capability make it the ideal solution for repairs on watering troughs, gutters and muddy pens. Farm Safe is both a heavy duty grade adhesive and a more flexible replacement for silicone that has been phased out in the new 2012 agriculture standards legislation. Farm Safe is a frost free product, it will not freee in sub-zero temperatures making it ideal for all weather conditions.

Green Specifications Application Specifications Product Specifications
  • Livestock safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No additional ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Wood
  • Flashing
  • Metal
  • PVC
  • Plaster
  • Windows
  • Foam
  • Brick
  • Glass
  • Concrete
  • Cement board, Siding
  • Tile, Laminate
  • Pressure Treated Lumber
  • Painted Surfaces
  • Water and Moisture Ready in under 30 minutes
  • Bonds underwater
  • Application Temperature is  -35° to +140°
  • Service Temperature -90° to +425° F
  • Paintable in 2 hours
  • Shear strength: 190 psi
  • Tensile strength: 205 psi
  • Elongation: 300% - 400%
  • Shore A Hardness: 35 +/- 5
  • Low Temp. Flexibility:  Retained to -90° F
  • High Temp. Flexibility: Up to 425° F for short periods
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Sag: None
  • Staining: None
 

Download Material

Material Data Safety Sheet  -    Technical Data Sheet - Sales Sheet

ECO-BOND HD100 (Heavy Duty / All Purpose) is the flagship adhesive for ECO-BOND adhesives - Born to provide a premium green alternative to all solvents and epoxies ECO-BOND HD100 provides a multi-purpose, one-component, structural sealant/adhesive designed for difficult bonding and sealing applications. ECO-BOND HD100 is moisture curing and was originally developed for green friendly industrial uses requiring elasticity, high strength and excellent adhesion. ECO- BOND HD100 is an excellent choice for almost all construction and product assembly applications. ECO-BOND HD100 is tough, elastic, and waterproof.

Green Specifications Application Specifications Product Specifications
  • Zero VOC
  • Non-petroleum based
  • Exceeds all CA Standards
  • No Toxic Odor
  • 100% Non-Toxic
  • Solvent free
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Green Building Points
  • Fiberglass
  • Tile
  • Wood
  • Galvanized Metal
  • Glass
  • PVC and many other plastics
  • Drywall and Paneling
  • Foam
  • Cementatious building materials
  • Concrete
  • Siding, Vinyl, Aluminum
  • Fiberglass
  • Tile
  • Wood
  • Galvanized Metal
  • Glass
  • PVC and many other plastics
  • Drywall and Paneling
  • Foam
  • Cementatious building materials
  • Concrete
  • Siding, Vinyl, Aluminum

 

Download Material

Material Data Safety Sheet - Technical Data Sheet


NON-TOXIC SILICONE - Keeping your joints flexible and  your cracks sealed

AAMA Window and Door Approved.  APPLICATIONS: sealing, showers and baths, waterproofing, kitchens, windows, weatherproofing, glass replacement, anywhere a silicone would be used. PRIMER-LESS ADHESION TO: steel, aluminum, ceramics, coated metal, glass, wood, fiberglass, and many specialty materials (Kynar 500/Hylar 5000, Mica Fluropon, Metallic Fluropon, Weather X Siliconized Modified Polyester (SMP). SPECIFICATIONS: no toxic odor, mold and mildew resistant, tack free in 20 minutes, 24 hour cure, 200 psi, service temps of -40° to +350°, UV resistant.





Green Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
Application Specifications
  • Same
Product Specifications
  • AAMA Window and Door approved
  • Excellent adhesion to glass
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Bonds and seals fully submerged
  • Tensile strength: 255 psi
  • Peel strength: 19 pli
  • Elongation: 550%
  • Shore A Hardness: 20 +/- 5
  • Skin Time: 10 minutes
  • Tack Free Time: 20 minutes
  • Cure: 24 hours
  • Movement Capability: 25%
  • UV Resistance: Excellent
  • Bond Durability on Glass/Vinyl/Aluminum: 25%
  • Service Temperature -90° to +425° F
 

Download Material

Material Data Safety Sheet  -    Technical Data Sheet - Sales Sheet

Clearly the Best Choice

ECO-BONDtm CLR125 (Ultra Clear) Provides a multi-purpose one-component structural sealant/adhesive designed for difficult bonding and sealing applications. ECO-BOND CLR125 always provides primer-less adhesion to steel, aluminum, ceramics, Styrofoam, coated metal, glass, wood, fiberglass, and many plastics (Acrylic, polycarbonate, ABS, and PVC). ECO-BOND CLR125 is also suited for many applications requiring adhesion to concrete and cementatious building materials with an ultra bright clear finish.

Green Specifications Application Specifications Product Specifications
  • Children and pet safe
  • No toxic odor
  • Zero VOC’s off gassed during curing process
  • No ventilation needed
  • 100% Non-Toxic, no solvents
  • Approved for indoor use
  • Exceeds all CA standards
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED and NAHB Building Points
  • Not petroleum based
  • Wood
  • Metal
  • Drywall
  • Plaster
  • Foam
  • Glass
  • Concrete
  • Siding, Vinyl, Aluminum
  • Galvanized metal
  • Cement board
  • Water and moisture ready in under 30 minutes
  • Approved for indoor use
  • Mold and Mildew Resistant
  • Ultra Clear formulation
  • Extrudes at zero degrees
  • Bonds and seals fully submerged
  • Shear strength: 175 psi
  • Tensile strength: 200 psi
  • Peel strength: 34 pli
  • Elongation: 450% - 500%
  • Shore A Hardness: 30
  • Low Temp. Flexibility:  Retained to -90° F
  • High Temp. Flexibility: Up to 425° F for short periods
  • Tack Free Time: Less than 1 hour @77 degF/50% RH
  • Cure Rate: 1/4” Bead per 24 Hrs
  • Movement Capability: 25%
  • UV Rating: No discoloration or change in appearance after 2500 hrs. of UV
  • Application Temperature is  -35° to +140°
  • Service Temperature -90° to +425° F
  • Sag: None
  • Staining: None
 

Download Material

Material Data Safety Sheet  -    Technical Data Sheet - Sales Sheet